Best 3 Ton Floor Jack of 2019 Complete Reviews With Comparison

Best 3 Ton Floor Jack

Searching a best 3-ton floor jack is a daunting task due to its versatile nature as it could pick any vehicle. A best 3-ton floor jack needed to be tested on strength and portability criteria as both are supplementary to each other in most of the cases. Earlier a floor jack in the 3-ton category was a mechanics tool only due to its working and cost. But in recent time technology has made it convenient and cheaper enough to be used by everyone making it best 3-ton floor jack for the money.

Top 5 3-Ton Floor Jack Comparison Chart


Nesco Tools 2203
Our first pick is Nesco Tools 2203 due to its portability and easy to assemble design which makes it easy to use.

3 Ton Steel Heavy Duty Floor Jack
It a heavy duty jack with 78 pounds of weight and sack steel built up but its durability justifies its weight. It has dual parallel pump system which lifts any of the vehicle workloads in 3 to 3 -1/2 pumps. With just a requirement of ½ turns. It has a universal joint release mechanism which provides it the required precision control on the load descent in any of the handle position.

NOS NSJ0302 3 Tons Aluminum Service jack
It a service jacks with life capacity of 3 tons with a height range of 3.75 to 18.125 inch. It has ultra-light aluminum construction which weighs 27 pounds. If you are looking for a high-performance lightweight jack it will be a must try. The safety measures will be added advantage to add on.

Blackhawk B6350 Lift Service Jack
The service jack is in a 3-1/2 range which comes in unique design and fast lift technology which provide the lifting in very less time and effort.

NOS NSJ0301 3 Ton Aluminum Service Jack
Nos aluminum service jack comes in 3 ton capacity with the height range covered from 3.75 to 18.25 inches.

3 Ton Floor Jack Reviews

We have discussed here the best 3-ton floor jack for your vehicles. As you will go through the article you will get a better understanding of which jack will best fit for your automobile. So have a read.

1. Nesco Tools 2203

Our first pick is Nesco Tools 2203 due to its portability and easy to assemble design which makes it easy to use.

Nesco Tools 2203 Highlights

It a double plunger long weight jack which cover the range from 3-1/2 inches to 19.1/4 inches. It has an aluminum alloy body with the claim to achieve the height in mere 9 pumps. The jack comes in three pieces as the main body, handle and other two parts.

What we Like About Nesco Tools 2203

On the good side, it is super easy to assemble and it takes hardly five minutes for doing so.  It has a lightweight aluminum body is highly portable. , The roller and the caster are comparatively of high quality. The main feature worth mentioning for this jack is the requirement of least assembly time with ease in maneuverability.

What We Don’t Like About Nesco Tools 2203

On the downside, some of the users found it a little bit difficult to fit the handle in the respective handles. The user manual is not clear on the same. It’s an easy to assemble machine but still, there needs a customer support system which lacked here.

Best Price 3 Ton Floor Jack

Pros
  • Easy to assemble
  • Lightweight
  • The ease in maneuverability
  • Best price 3 ton floor jack
​Cons
  • The user manual is vague in instructions

2. 3 Ton Steel Heavy Duty Floor Jack

It a heavy duty jack with 78 pounds of weight and sack steel built up but its durability justifies its weight. It has dual parallel pump system which lifts any of the vehicle workloads in 3 to 3 -1/2 pumps. With just a requirement of ½ turns. It has a universal joint release mechanism which provides it the required precision control on the load descent in any of the handle position.

3 Ton Steel Heavy Duty Floor Jack Highlights

It has two-piece knurl aluminum handle which provides the needed grip and the foam bumper prevent any damage possibility to the vehicles. The lifting range covered by the jack provides it an extra point as it is suitable for both low floored and high floored vehicles. It comes with extra wide steel caster which provided it the required stability. It comes with a warranty for repair of any damaged par.

With all the specification it is a high-performance jack with best services provided. The guidelines provided are easy to understand and properly written.

What we Like About 3 Ton Steel Heavy Duty Floor Jack

It has no crack sound while lifting which is one of the most common problems in heavy duty jacks. It has a safe built up with no change of rapid lowering of jack while you are inside your car. The rubber handle assures to protect a vehicle of any kind whether low or high floor.

It has convenient to use specification with long lasting life. It could achieve maximum height with only 5 five pumps. Adding hydraulic fluid is just before the use as mentioned in the specification.

What we Don’t Like About 3 Ton Steel Heavy Duty Floor Jack

Well, it has certain limitations when it comes to lifting heavy vehicles or SUV as it could not be able to raise it to the requisite height.

Pros
  • Durability
  • Safety measures and stability
  • Suitable for both low floor and high floor vehicles
​Cons
  • Weight
  • Price
  • Not portable enough

3. NOS NSJ0302 3 Tons Aluminum Service jack

It a service jacks with life capacity of 3 tons with a height range of 3.75 to 18.125 inch. It has ultra-light aluminum construction which weighs 27 pounds. If you are looking for a high-performance lightweight jack it will be a must try. The safety measures will be added advantage to add on.

NOS NSJ0302 3 Tons Aluminum Service jack Highlights

it has thick side plate with reinforced arms for the required strength. It has proper chassis torsion control at a place with control and durability at the place. It comes with a safety valve which prevents overloading with 2 piece handle and bumper pad for extra safety needed.

What we Like About NOS NSJ0302 Service jack

It is a lightweight aluminum built jack so if durability is a concern may it will perform less than the steel body built. But the portability is high compared to later due to its lightweight and easy to assemble the structure. Though, the finish given to it makes it too attractive to resist. It has a wheel made of steel so don’t worry about any misadventure. It worth’s the money, with easiness in maneuvering due to its inbuilt design.

What We Don’t Like About NOS NSJ0302 Service jack

The assembling required extra effort with less clear user manual. Also if you possess a low floor sports car this jack will not get beneath your car.

Best 3 Ton Aluminum Floor Jack

Pros
  • Lightweight
  • Easy to assemble
  • Quality finish
  • Steel made a wheel for safety
  • Easy in maneuvering
​Cons
  • Less durable
  • Not suitable for low floor vehicle
  • Not very easy to assemble

4. Blackhawk B6350 Lift Service Jack

The service jack is in a 3-1/2 range which comes in unique design and fast lift technology which provide the lifting in very less time and effort.

Blackhawk B6350 Lift Service Jack Highlights

It has swivel saddle which helps in gaining right jack positioning. It is a heavy duty jack with a steel body for long durability and safety. It has all the features to call it best price 3-ton floor jack but lack of communication makes it an unsung hero.

What we Like About Blackhawk B6350 Lift Service Jack

Service jack comes with a bypass device which prevents it from damage through overpumping. It has a built-in internal safety valve and a vent plug which ensures that the user has a safe operation.

What We Don’t Like About Blackhawk B6350 Lift Service Jack

It’s a heavy jack which doesn’t create a problem in picking and rolling around the garage but if you want to pick it up and carryall way around then it may not be the jack you required. The instruction is also a thing to brag about especially if you are totally new to floor jack.  Like the instruction does not mention that the bolt inside the handle fork should be removed as it blocks the washer if not the rod will fly off when the tension is released?

Instructions mention expelling the air which has been pressurized before first use or verification of oil level. For doing so oil plugged required to be removed which as per instruction is on the top of the hydraulic reservoir. You will found it near, the small tray required to be removed which is in front of the handle fork. This plug is red in color and could be removed by use of a screwdriver. Reinserting the plug again has been a tough task for most of the users and required a flat screwdriver instead. The same needed to be mentioned in the instruction.

Best 3 Ton Floor Jack

Pros
  • 3.5-ton capacity
  • Safety measures
  • Bypass device for preventing over pumping
​Cons
  • Weight
  • User manual not up to the mark

5. NOS NSJ0301 3 Ton Aluminum Service Jack

Nos aluminum service jack comes in 3 ton capacity with the height range covered from 3.75 to 18.25 inches.

NOS NSJ0301 3 Ton Aluminum Service Jack Highlights

It is ultra light with aluminum construction of just 27 pounds. It has a well-designed body with a thick frame and side plate with reinforcing lift arm which provides added strength required. Its chassis torsion provides control and durability required. It has a safety valve present which prevents any kind of overloading in addition to piece handle with the bumper pad.

What we Like About NOS NSJ0301 3 Ton Aluminum Service Jack

If it’s being recommended then it’s ultra lightweight will be the first reason. But to a surprise, its strength is its hidden quality. It could lift a jeep or SUV or even a mini truck by ease.

It could very easily win the battle of the best 3ton aluminum floor jack. When it comes to aluminum jack strength is always a matter for concern but to a surprise, this has overcome this limitation. If foam handle is taken care of its best 3ton floor jack for the money.

What We Don’t Like About NOS NSJ0301 3 Ton Aluminum Service Jack

Though instructions provided are again a matter of concern as if not fitted properly oil leaking occurs and no support service is there to provide assistance on same. Foam handle is also a matter of concern for the weight ranges it is available.

Best 3 Ton Floor Jack for the Money

Pros
  • Portability with strength
  • Cost-effective
  • Safety measure
​Cons
  • Bad user manual
  • Foam handle

Final Verdict

A 3-ton floor jack has to lift heavy vehicles and that vehicle should not come down also it should do that always. The best price 3-ton floor jack should not be compromised on any criteria whether safety, durability or portability is concerned. Seems like, this jack passes all the litmus test to be called best 3-ton floor jack.

Click Here to Leave a Comment Below

Leave a Reply:

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close