When a jack is used to lift the truck what we want is that at first place it should have pumping capacity to lift it. Secondly, we would make sure the truck doesn’t come down which depends upon strength and safety measures of a jack. Searching the same specifications in a jack is a daunting task. But when it comes to heavy vehicles we need to consider only best floor jack for trucks.
Top 5 Floor Jack for Trucks Comparison Chart
Floor Jack for Truck Reviews
Here we have made a list of some handpicked floor and service jack which cover a range in term of height. At the same time, due care has been taken that quality should not be compromised
1. Torin Trolley Floor Jack
Torin Big Red Hydraulic trolley Floor jack’s specification mentions it as a great floor jack for trucks and SUVs. It comes with an extra long neck which helps to lift higher vehicles easily. This jack has a lifting range of 5-7/8 inch to 17-1/4 inches with capacity for 3 tons.
It’s a heavy duty floor jack with an extra long neck. Torin Big Red Hydraulic trolley Floor jack has high mobility with 360 degrees swivel caster for easiness in mobility. Its specifications make it best floor jack for trucks if the pumping issue being properly taken care of.
What we Like About Torin Trolley Floor Jack
It comes with an extra long neck which makes lifting to a higher height easy task. The jack is highly portable with a removable option for long neck and arms. The detachable feature makes its storage efficient and quite handy to use. It comes with 360-degree swivel caster for easiness in mobility which makes it highly maneuver.
What We Don’t Like About Torin Trolley Floor Jack
It does not have any handle given to pick it up and its weigh it too heavy to carry on. The built-in required more work to be done with size affecting its portability. The jack plate is comparatively small and required a lot of pumping for heavy vehicles like SUV.
Some of the users state that if guidelines properly followed pumping not being a problem. Though on the practical ground it does not seems so.
Some of the users found a low level of fluid while lifting up. The main problem lies with vague instruction which has not mentioned to push over the rubber piece to open a gap for air escape. After closing it again, it could be pumped easily. The instructions are totally silent on some of the topics which are its major drawback.
2. Lift Master Floor Jack
It is a 3-inch low profile jack more suitable for lowered vehicles. It comes with a dual pump system which provides the requisite lifting without pumping. Lift master has two pieces of knurled steel handle which provides a nice grip. It has also a foam bumper which prevents the damage of vehicles. It also has strengthened rubber pad for better protection and function.
The jack comes with a wide plate with a removable pad with no risk of slipping which ensures safe lifting. It has a lower end profile, therefore, get under most of the cars. Though it is not with the lowest ending provide a safe and stable platform. Pumping, though require, but only a few in number to lift it up to a height. Jack stand provided to make the elevation safe and could be in the same position for hours. The instructions are also very clear and easy to understand.
What we Like About Lift Master Floor Jack
It is a heavy duty jack which effects portability to an extent but he handles provided help to carry it easily. It’s a solid and well-built jack with easy to use specification. Its lift range is definitely its biggest highlight which is from 3 inches to 19.7 Inches.
What We Don’t Like About Lift Master Floor Jack
Weight is an issue in term of portability.
3. Power Built 620422E Heavy Duty 4000 lb Triple Lift Jack
This power built jack’s durability is the talk of the town. It easy to understand manual with prompt customer service to enhance the features offered. It has a patent design with a removable lift saddle and padded lift rails.
As mentioned it comes up with the lifting capacity of 2 ton. For safety measures, it has a locking safety bar which holds the jack at one place. It can easily lift trucks or SUV with ease for any purpose. It has removable lift saddle and padded lift rails both are patent to the company.
What we Like About Power Built Jack
Its flexible design provides a triple lift and used for multiple types of vehicle framework. It also has a locking safety bar to hold jack at one place.
What We Don’t Like About Power Built Jack
The lowering of the jack has created a problem for most of the users. Here lowering does not occur at a constant pace and sometimes it comes so rapidly that it makes the incident unwanted.
4. Performance Tool W1627 3.5 Ton (7,000 lbs.) Capacity Low Profile Service Jack
Performance Tool W1627 3.5 Ton has 7000lbs load capacity with a lift range from 4 inches to 20-1/2 inches. It has swivel caster and Dual Pump which make the lift easy to go. It could be easily used with rolled door sill with a slight lift to set up the wheel over the door sill. It lifts up easily and it comes down in a more controlled manner.
What we Like About Performance Tool W1627
With a twist of the handle, the saddle can be temporarily lifted off and replaced with the custom saddle design. It has a small lift pack with lift limit of 15 inches. Price on which these specifications are present it could be best floor jack for lifted trucks.
For safety purpose, it has a durable flanged steel frame with a rubber saddle pad. The quality has passed ASME PALD -2005 criteria’s. It comes with a bypass valve for safety. To crisp, it could be said to be rugged, sturdy, oil tight and convenient to use jack.
What We Don’t Like About Performance Tool W1627
We expected more lift range to be covered by it.
5. Sunex 6602LP Low riser Service Jack
To a surprise, quality is the first thing to talk about in the context of this jack. it has a great material quality which is in a way mitigating the myth that “made in China “comes with bad quality standards. The overall design is really satisfactory with no sharp edge or poor quality stamping. The handle also has a large diameter thread whose lathe turned on the end.
But the range it covers for the quality is the answer for its entire drawback. It has ranged from 2.75 inches to 24 inches. Therefore it can go beneath any ultra low sports car with the same ease as it could lift high enough the SUV and trucks. It comes with a quick lifting system with controlled lowering.
What we Like About Sunex 660
We liked its specifications as the quick disconnect button is thick steel and solid inbuilt. These require very little movement in the handle to lift therefore even at the tight spot it could be easily used. The design has handy specifications with handle remain at the same place while lifting without forwarding or backing.
Though costly the range, it covers for the given quality worth each of the penny invested on this best-rated floor jack.
What We Don’t Like About Sunex 660
The cost is a matter of concern as its competitors are way cheaper than it.
Searching a floor jack has very much attention required on its strength with height. Many of the jacks are offering extra height but somewhere after using it for a few occasions, it has failed on the strength criteria. While searching the best-rated floor jack it should be kept in mind that the need is of utmost importance. Like if the jack is required for a truck which is to be lifted very high the strength, lifting capacity all matters.
The lowering down pace and safety is a must to taken care of in that case. While when searching a floor jack for a truck the lowering capacity is a test to be done. Some of the jack though claims but not being able to fit beneath the low floor cars properly. The quality of jack is something which should be a concern in both of the cases. To cut it short always pen down the requirements before making the buy with proper research will be a great help for you.